Stems

- Now in aluminum
- VRTS - Variable Radius Geometry
- 2-bolt stem installs onto any rise bar without shims, scratches, or effort! Yes, it's easier to install vs a 4 bolt stem
- Designed and machined in San Diego, CA
- Weight: 133g with hardware

- VRTS - Variable Radius Geometry
- 2-bolt stem installs onto any rise bar without shims, scratches, or effort! Yes, it's easier to install vs a 4 bolt stem
- Includes shims for 31.6mm handlebar
- Designed and machined in San Diego, CA
- Weight: 133g with hardware

- Unique adjustable length for the perfect fit today and for the future
- Adjustable insert allows for two different reach options
- CNC machined from 6061 aluminum with slotted sides and rear section
- Features chamfered edges and laser-etched logos

The Box Two Front Top is a modern 1-1/8 inch by 22.2mm stem designed specifically for BMX racing. Box Two Top Load stem bodies are cold-forged and CNC-machined from the highest quality 6061-T6 aluminum. The lightweight front clamps are cold-forged and CNC-machined for increased stiffness and strength. -Material: 6061-T6 Aluminum -Process: Cold-Forged -Hardware: Chromoly Clamping Bolts -Finish: Anodized w/Laser-Etched Graphics Weight: -48mm: 234 g / 8.3 oz -53mm: 240 g / 8.5 oz

The Box Two Front Load is a modern, 22.2 stem designed specifically for BMX racing. Box Two Front Load stem bodies are cold-forged and CNC-machined from the highest quality 6061-T6 aluminum. The lightweight front clamps are cold-forged and CNC-machined for increased stiffness and strength. -Material: 6061-T6 Aluminum -Process: Cold-Forged -Hardware: Chromoly Clamping Bolts -Finish: Anodized w/Laser-Etched Graphics Weight: · 48mm: 224 g / 7.9 oz · 53mm: 230 g / 8.1 oz

All Box stems are engineered and crafted using our Oversized Technology. As we follow the load paths down the handlebars we have focused our attention on the stem-to-bar interface. Since the Oversized handlebars have an increased wall thickness and tube diameter in this sector we have reciprocated with an augmented stem interface with greater surface area. We’ve done this by moving material from low stress areas. This has greatly minimized twist and contributed to responsiveness. As the stem in mated with the handlebars we have contributed to increased pedaling stiffness by providing a backstop to the “lifting” phenomenon. There is no point pushing hard on your pedals if you can’t pull up on your handlebars and deliver that power. Power can easily be lost to handlebar-to-stem deflection and the consequences can be poor power delivery and steering control. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency. Key differences: This particular model stem pushes our Oversized Technology to the extreme as it maximizes the shift of material from low stress zones to the Oversized interface. These stems are engineered for the smaller-sized racers. -Lightweight 3D Hollow Design -Front-Load Clamp Design to Fight Pull-Up Forces -Large Bar Bore -Large Hollow Clamping Bolts -Superior Strength

All Box stems are engineered and crafted using our Oversized Technology. As we follow the load paths down the handlebars we have focused our attention on the stem-to-bar interface. Since the Oversized handlebars have an increased wall thickness and tube diameter in this sector we have reciprocated with an augmented stem interface with greater surface area. We’ve done this by moving material from low stress areas. This has greatly minimized twist and contributed to responsiveness. As the stem in mated with the handlebars we have contributed to increased pedaling stiffness by providing a backstop to the “lifting” phenomenon. There is no point pushing hard on your pedals if you can’t pull up on your handlebars and deliver that power. Power can easily be lost to handlebar-to-stem deflection and the consequences can be poor power delivery and steering control. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency. Key differences: In this particular model stem we’ve modulated the Oversized formula to emphasize pedaling stiffness. We have transferred material specifically to sectors that experience sudden stress from pulling up on the handlebars. You’ll feel a difference in your acceleration. These stems are engineered for the larger-sized racers. -Material: 6061-T6 Aluminum -Process: Cold-Forged -Hardware: Chromoly Clamping Bolts -Finish: Anodized w/Laser-Etched Graphics Weight: -48mm: 280 g / 9.8 oz -53mm: 290 g / 10.2 oz

- A modern stem designed specifically for larger BMX racers
- 45 Degree Load Clamp Design with Side Skirts for Rigidity
- Cold-forged and CNC-machined from 6061-T6 aluminum
- Clamp Diameter: 31.8mm; Stack Height: 32mm; Rise: 0 deg
- Weight: 48mm: 290 g / 10.2 oz; 53mm: 290 g / 10.5 oz

- One-piece design for incredible high strength-to-weight ratio, at the expense of some compatibility: not every handlebar will be compatible to the Barkeeper stem
- Highly precise production includes: complex 3D-forging, multi-tempering, CNC machining of critical contact interfaces, shot peened for surface hardening, laser engraving, and anodizing
- All three available lengths (35mm, 45mm, 55mm) were successfully tested to match and exceed the requirements for mountain bike components (category 5) of DIN EN 17406:2021 and ASTM F2043-13.
- Rise: 0°; Stack height: 40mm; Clamping width: 50mm; Compatible steerer tubes: 1 1/8"
- 35mm length: 86g / 45mm length: 96g / 55mm length: 112g

This BMX quill stem combines a steel rod with an alloy top. The 4-bolt top clamp securely fastens handlebars.

With its alloy/steel construction and 4-bolt clamp design, the Freestyle is a trusty BMX quill stem. - Hollow-core stem bolt - Quill Length: 4-1/4-inches - Quill diameter: 21.1mm

With its alloy/steel construction and 4-bolt clamp design, the MX is a trusty BMX quill stem. - Quill Length: 4-1/4-inches - Quill diameter: 21.1mm

The BrickTop alloy stem is a classic style, top-mount BMX stem with a 4-bolt handlebar clamp.

Enduro has unquestionably evolved ever closer to Downhill. The Enduro MK3 Stem is all you need for hitting the trails with wingsuit type accuracy. This Stem was born out of rider's demands for precision and for those moments when you have to be inch-perfect. Taking design elements from our World Cup-winning Direct Mount MK3 Stem and splicing these with our critically acclaimed Enduro MK2 Stem. We developed the Stem specifically with Pro's and Bro's alike. It was obvious we all live for the same challenge of pushing our own limits. As riders, we want a Stem that inspires confidence to change lines through the middle of a rock garden like it's no big deal or slap the inside of a turn and translate all your weight to front-wheel traction. Providing ear-to-ear grins and saying to your mates at the bottom of a trail, "Did you see that?". From the start of the design process, it became clear that we wanted extra rigidity. To yield this, we would need to make the Stem using a forging process - a new thing for us. The result of this allowed us to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result, this gives superior strength, fatigue and impact resistance. Another area where we made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. We've vastly increased this to give a stout, rock-solid feel and as close to the MK3 Direct Mount Stem as we could. Furthermore, everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition and like every Burgtec product, it's fully CNC machined and anodized in all your favourite flavours. Tested with the world's fastest jibbers and sendiest racers, this stem has everything you need to hit all those rowdy racing lines or pull that little bit harder off that big sender. - Forged and Fully CNC machined from AL6061 – T6 Aluminium - Stainless Steel Hardware - Available lengths - 35mm, 42.5mm and 50mm - Available in both 31.8mm (Black only) and 35mm Clamp - Weight: 35mm 138g, 42.5mm 152g, 50mm 160g

- CNC machined aluminum direct mount stem used by top World Cup pros
- Stainless steel hardware
- Fits BoXXers, Fox 40, DVO, Manitou, Marzocchi any other forks that use IS mount
- Designed and machined in the UK

ATTACK MODE The perfect pairing with a CADEX Road or All-Road/Gravel Handlebar, the CADEX Race Stem features a unique two-bolt faceplate and hidden top cap design to maximize aerodynamic efficiency at your bike’s critical leading edge. Available in a wide range of sizes to assure optimal fit. FEATURES: - Precise T800 and T1100 carbon layup maximizes stiffness and minimizes weight - Two-bolt faceplate and hidden top cap design helps reduce drag - Super-light titanium bolts - 70mm to 140mm lengths SPECIFICATIONS: - Weight: 114/116/118/120/124/128/132/136g - Length: 70/80/90/100/110/120/130/140mm - Rise: -10° - Steerer Tube: 1 1/4" or 1 1/8" (with carbon adapter) - Stack: 41mm - Material: T800+T1100 carbon laminate

Cult Redemption stem, for when you want a topload stem but without so much rise. - Wider and beefier than the OG Salvation stem - Improved clamping area - Recessed compression bolt for a clean look - Bar Clamp Diameter (mm): 22.2 - Steerer Clamp Diameter: 1-1/8" ins

Wider and beefier with and improved clamping area and recessed compression bolt for a clean look. - Bar Clamp Diameter (mm): 22.2 - Steerer Clamp Diameter: 1-1/8" ins - Stem Type: Top Load

- Lightweight, rigid stem for XC or Gravel bike use
- Forged and CNC machined from 6066 aluminum with 4-bolt alloy faceplate and stainless steel hardware
- 42mm clamp stack height with ghosted, laser-etched graphics. 96g (60mm) to 120g (100mm)

- Lightweight, rigid stem for XC, Gravel or Road bike use
- HCR, hidden cable routing, beneath stem with guide piece keeping housing hidden under stem channel
- Forged and CNC machined from aluminum with 4-bolt alloy faceplate and stainless steel hardware
- Constructed to align with HCR headset/spacers (DC1621/DC1625) for headtube routing
- One-piece slotted aluminum spacers included with stem, (1) 10mm and (2) 5mm

The eeSilk stem features up to 20mm of tunable compliance via a single bolt external elastomer change to choose between soft and firm modes for no matter where the ride takes you. For riders looking for a more streamlined and sleeker look. - Up to 20mm of compliance to smooth your ride and reduce fatigue - 49mm stack height - 31.8 Stem Clamp

eeSilk Stem is a fatigue-reducing compliance stem that noticeably reduces vibrations on variable surfaces. With up to 20mm of tunable compliance, an easy single bolt external elastomer change and a soft/firm compliance switch – the eeSilk Stem makes any road, no matter the terrain, smoother. - Weight: 225g - 235g - Angle: -6° (only) - Stack Height: 49mm - Stem Clamp: 31.8mm

- 6061 premium alloy - Designed to be light and strong - Enduro/DH focused - 31.8 & 35mm clamp

Chromag's HiFi stem is light and extremely strong for the ultimate control and performance. The HiFi features a blended shape thanks to 3D forging. Chromag contours every surface for human contact and structural optimization. - 3D forging - 200 grams - Low stack height

Chromag's HiFi V2 stem is light and extremely strong for the ultimate control and performance. The HiFi features a blended shape thanks to 3D forging. Chromag contours every surface for human contact and structural optimization. - 3D forging - 175 grams (35mm length) - Low stack height

We've used our knowledge of making stems for almost 20 years to create a new, highest level, Canadian-made bar grabber. There's no doubt the RIZA is our finest stem to date. CNC machined in Whistler, Canada from premium 6061 billet aluminum, it features our new faded edge on the clamp face to help avoid hot spots and stress risers when your bar flexes under load. Also it looks really flippin' nice. The RIZA comes in 31.8 and 35mm clamps and 32, 38 and 45mm lengths.

We've used our knowledge of making stems for almost 20 years to create a new, highest level, Canadian-made bar grabber. There's no doubt the RIZA is our finest stem to date. CNC machined in Whistler, Canada from premium 6061 billet aluminum, it features our new faded edge on the clamp face to help avoid hot spots and stress risers when your bar flexes under load. Also it looks really flippin' nice. Specs - Process // CNC Machined - Material // Premium 6061 Alloy - Length // 32mm / 38mm / 45mm - Rise // 0° - Clamp Size // 31.8mm / 35mm - Stack Height // 38mm - Steerer // 1 1/8" - Weight // 194g (31.8/38)

- Forged and machined 6061-T6 aluminum construction with 4-bolt removable faceplate
- Twin, opposed-direction steerer clamp bolts
- Matte black anodized with red embossed and painted logo on faceplate. 176g (120mm)

- Forged 6061-T6 aluminum alloy stem with a 4-bolt faceplate and forged Cinelli logo
- Twin opposed-direction steerer clamp bolts (great for carbon steerers)
- Black with gray graphics. 145g (110mm)

- Updated reissue of the classic 1A design with conical-style steerer expander system
- 6066 T6 forged and CNC machined construction and milky silver anodized
- 26.0mm handlebar standard with 22.2mm quill